2022-06-21 12:49:54
Всем доброго дня.
Для OLT1404/OLT1408 есть свежая прошивка. Из изменений:
1. Add 'try-cont' option to allow user authenticating by next method
2. The system will use shaper per ONT if shaper is enabled at bootup.
When shaper is activating, Add qos ds-meter shaper command OLT will treat downstream traffic as the same priority. If downstream PON port congestion, all traffic will round-robin to egress.
3. ontLan Setup DNS value DNS proxy| static|from ISP
4. show ontWifi status
5. MVLAN for ontWan setting(CLI/MIB)
6. Configurable command privilege
7. ontVideoPortStatusTable and ontWanControlable/ontLanControlable...
8. Traffic monitoring ont-pm-rate feature
9. ERPS support
10. Command log will be saved no matter OLT crash or OLT reboot
11. ONT bundle feature.
12. add ont wifi roaming CLI/MIB
13. add ont power over ethernet CLI/MIB
14. Change Template unique attribute behavior:
ontwan: pppoe-username/pppoepassword/ip/mask/gateway/pridns/secdns ontwifi: SSID/password
uniport voip: username/password " - xxx is unique setting"
" - modify unique setting in ONT will not influence refTemplate relation"
" - modify unique setting in Template will not apply to existing reference ONT
15. 8 concurrent CLI/SSH/WEB active accounts
16. Enlarge max number of local user to 10.
17. number of syslog entries changes from 10000 to 3731(while all log with length 127) ~ 10825
18. for logs of "system reboot" and crash logs, OLT will save it as "high priority log"
19. syslog will reserve 100 entries for "high priority log" and will not be overwrite by new none-"high priority log"
20. OLT will restore all syslog after reboot/crash/sysreset/watchdog triggered
21. following logs priority changed from normal to high
System has reset without management command System has reset due to a management command System cold start
System warm start
22. command sending to syslog server should be SYSLOG_INFO
23. Remove uniport vlan failed, because voip use it. Do not check voip vlan.
24. modify bcmpon default parameter - guard bits
+ решены несколько багов с перезагрузкой и зависанием; , более точно считается расcтояние до ONU; несколько проблем с отображением информации; Cannot provision OMCI for those ONT that uploads T-CONT with allocId=0xffff
За новой прошивкой обращайтесь
Zyxel Support SP RU
91 views09:49